diy video surveillance From kits to cameras to all-in-one units, the new generation of do-it-yourself security is smarter, simpler, and more affordable than anything you've seen before.

NVR Kits

4 Channel NVR - Stand alone with 2TB HDD

4 Channel NVR - Stand alone with 2TB HDD

1 x Stand Alone 4 Channel NVR with pre installed 2TB HDD
Hard Drive has a 2 year warranty

$499.00 inc. GST $450 inc. GST

4 Channel NVR Kit with 4 x 3MP IP Mini Bullets

4 Channel NVR Kit with 4 x 3MP IP Mini Bullets

1 × 4 Channel NVR with 2TB HDD pre installed
4 × 3MP IP Mini Bullets
4 × 20m Cat5 patch leads
Note: excludes monitor and HDMI cable

$1150.00 inc. GST $1039.00 inc. GST

4 Channel NVR Kit with 4 x 3MP IP Turrent Domes

4 Channel NVR Kit with 4 x 3MP IP Turrent Domes

1 × 4 Channel NVR with 2TB HDD pre installed
4 × 3MP IP Turrent Dome Cameras
4 × 20m Cat5 patch leads
Note: excludes monitor and HDMI cable

$1150.00 inc. GST $1039 inc. GST

8 Channel NVR - Stand alone with 2TB HDD

8 Channel NVR - Stand alone with 2TB HDD

1 x Stand Alone 8 Channel NVR with pre installed 2TB HDD
Hard Drive has a 2 year warranty

$640.00 inc. GST $550 inc. GST

8 Channel NVR Kit with 4 x 3MP IP Mini Bullet

8 Channel NVR Kit with 4 x 3MP IP Mini Bullet

1 × 8 Channel NVR with 2TB HDD pre installed
4 × 3MP IP Mini Bullet Cameras
4 × 20m Cat5 patch leads
Note: excludes monitor and HDMI cable

This Kit comes with 4 IP cameras. The NVR will allow you to add an additional 4 IP cameras. Thats a total of 8 IP Cameras

$1499.00 inc. GST $1099.00 inc. GST

8 Channel NVR Kit with 4 x 3MP IP Turrent Domes

8 Channel NVR Kit with 4 x 3MP IP Turrent Domes

1 × 8 Channel NVR with 2TB HDD pre installed
4 × 3MP IP Turrent Dome Cameras
4 × 20m Cat5 patch leads
Note: excludes monitor and HDMI cable

This Kit comes with 4 IP cameras. The NVR will allow you to add an additional 4 IP cameras. Thats a total of 8 IP Cameras

$1499.00 inc. GST $1099.00 inc. GST

IP Cameras

3MP IP Mini Bullet Camera

3MP IP Mini Bullet Camera

Features:
3MP High Resolution
HD Real time video
3D DNR & DWDR & BLC
EXIR illuminator (up to 30m)
IP66
PoE

$195.00 inc. GST $170 inc. GST

3MP IP Turrent Dome Camera

3MP IP Turrent Dome Camera

Features:
3MP High Resolution
HD Real time video
3D DNR & DWDR & BLC
EXIR illuminator (up to 30m)
IP66
PoE

$195.00 inc. GST $170 inc. GST

Accessories
Videos

Analogue Vs IP Playback

Change User Password

Add and Remove a User

Change Time and Date

Edit Camera Name

Set NVR Recording Type

Playback recorded footage

Navigate Live View

Troubleshooting

No image displayed on the monitor after start up

No image displayed on the monitor after start up

Possible reasons
1 – No VGA or HDMI connection
2 – Monitor cable might be damaged
3 – Input mode of the monitor is incorrect
Procedures
1. Verify the device is connected to the monitor via HDMI or VGA cable.
If not, please connect the device to the monitor and reboot NVR.
2. Verify the connection cable is good.
If there is still no image displayed on the monitor after rebooting, check connection cable is good and change the cable to reconnect.
3. Verify input mode on monitor is correct.
Check the input mode of the monitor matches with the output mode of the device. Example – if the output mode of the NVR is HDMI output, then the input mode of the monitor must be the HDMI input. If this is not correct please modify the input mode of the monitor.
4. Check if the fault is solved by the steps 1 to step 3.
If it is solved, finish the process.
If not, please refer to www.spds.com.au website and email support at support@spds.com.au

There is an audible warning sound when NVR starts up

There is an audible warning sound “beep-beep-beep-beepbeep” after a new NVR starts up

Possible reasons
1 – No HDD is installed in the device.
2 – The installed HDD has not been initialized.
3 – The installed HDD is not compatible with the NVR or it is faulty.
Procedures
1. Verify the HDD is initialized.
Select ‘Menu>HDD>General’. If the status of the HDD is “Uninitialized”, check the checkbox of the corresponding HDD and click the “Init” button.
2. Verify the HDD is detected or is in good condition.
Select ‘Menu>HDD>General’. If the HDD is not detected or the status is “Abnormal”, please refer to www.spds.com.au website and email support at support@spds.com.au.
3. Check if the fault is solved by the steps 1 to step 2.

If it is solved, finish the process.
If not, please refer to www.spds.com.au website and email support at support@spds.com.au

NVR has only displayed one camera on screen

NVR has only displayed one camera on screen

Right click on screen, select ‘Multi Screen’ and choose camera layout i.e. 2×2 or 3×3

Camera has not loaded on the screen

Camera has not loaded on the screen or ‘No Link’ appears in camera channel

Check camera cable for any damages and that it is plugged in properly at both ends. Restart the camera by removing cable from the back of the NVR for 10 seconds then plug back in. Wait approx. 2-3 minutes for IP cameras to start back up again.

How do I troubleshoot an IP camera that is not working?

How do I troubleshoot an IP camera that is not working?

Swap the camera over with a working camera. If the already working camera still does not work on a non-working line, the cable may be damaged and will need to be replaced. If camera still doesn’t work on a working line, the IP camera may be faulty.
If IP camera is not detected or the status is “No Link”, please refer to www.spds.com.au website and email support at support@spds.com.au.

No monitor connected with the NVR locally

No monitor connected with the NVR locally and when you manage the IP camera to connect with the device by web browser remotely, of which the status displays as Connected. And then you connect the device with the monitor via VGA or HDMI interface and reboot the device, there is a black screen with the mouse cursor: Connect the NVR with the monitor before start up via VGA or HDMI interface and manage the IP camera to connect with the device locally or remotely, the status of the IP camera displays as Connect.

Possible reasons
1 – After connecting the IP camera to the NVR, the image is output via the main spot interface be default.
Procedures
1. Enable the output channel
2. Select “Menu>Configuration>Live View>View”, and select video output interface in the drop down list and configure the window you want to view.
Note: The view setting can only be configured by the local operation of the NVR.
Note: Different camera orders and window-division modes can be set for different output interfaces separately, and digits like ‘D1’ and ‘D2’ stands for the channel number, and ‘X’ means the selected window has no image output.

The image freezes when the NVR is playing back

The image freezes when the NVR is playing back by single or multi-channel.

Possible reasons
1 – A poor network between the NVR and IP camera, and there exists packet loss during transmission.
2 – The frame rate is not the real-time frame rate.
Procedures
1. Verify the network between the NVR and IP camera is connected.
When image is stuck, check all cables and connections to make sure camera is operating properly in live view and restart camera.
2. Verify the frame rate is real-time frame rate.
Select “Menu>Record>Parameters>Record”, and set the resolution and bitrate to a lower level.
3. Verify the hardware can afford the playback.
Select “Menu>Record>Encoding>Record”, and set the resolution and bitrate to a lower level.
4. Reduce the number of local playback channel.
Select “Menu>Playback”, and uncheck the checkbox of unnecessary channels.
5. Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please refer to www.spds.com.au website and email support at support@spds.com.au

No record file found in the NVR local HDD

No record file found in the NVR local HDD, and prompt with “No record file found”.

Possible reasons
1 – The time setting of the system is incorrect.
2 – The search condition is incorrect.
3 – The HDD is in error or not detected.
Procedures
1. Verify the system time is correct.
Select “Menu>Configuration>General>General”, and verify the ‘Device Time’ is correct.
2. Verify the search condition is correct.
Select “Playback”, and verify the channel and time are correct.
3. Verify the HDD status is normal.
Select “Menu>HDD>General” to view the HDD status, and verify the HDD is detected and can be read and written normally.
4. Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please refer to www.spds.com.au website and email support at support@spds.com.au

case studies

New security system for our new office

We just moved to a brand new office in Melbourne and needed to control the access to and from the premises. Scope constructed a solution to suit our needs perfectly. Their Access Control System allows us to control not only who has access to our premises, but what times and days access is allowed. They tailored a solution to suit both our office and our budget; providing advice and access control solutions that range from our parking structure to secure keypad access for remote stand - alone, security doors. Read on

testimonials

  • “Valeo Construction have built a strong relationship with Scope Protective and Data Solutions over the years. They have been responsible for all our security needs across all facets our business; from our multiple construction sites to our Head Office. They have routinely provided clear advice about all our security options, and have acted promptly whenever needed. Their responsive, and always helpful customer service is a testament to Tim and his staff’s hard work and loyalty to his customers. We would highly recommended SPDS for all protective services needs to any size business.”

    Tom Commercial Manager, Valeo Construction

contact us

Rear of 266 High Street,
Northcote VIC 3070, Australia

03 9486 2366

Enquires: sales@spds.com.au Accounts: accounts@spds.com.au Employment: hr@spds.com.au

03 9486 2355

VIC Master Licence744 136 41S VIC Security Installer744 136 62S NSW Master Licence000 101 688 QLD Master Licence393 2487

web design by Actualise Design